AskChainX Admin

One of the duties of the visual/welding inspector is to carry out materials inspection. Looking at the below where/when may the inspector be required to carry out materials inspect

One of the duties of the visual/welding inspector is to carry out materials inspection. Looking at the below w...

Productivity in the GTAW process can be increased by

The welding technique in which the electrode points to the opposite direction of the welding is called

The width to depth ratio of the weld bead generally naturally higher in which of the following welding processes?

Which grain structure from below is most susceptible to hydrogen cracking?

Submerged arc welding is noted for its ability to employ high welding currents owing to the properties as functions of flux. Generally, what polarity is used up to about 1000A?

On inspecting a completed 150mm OD pipe weld, some small smooth, shallow areas of undercut have been found <0.25mm deep. The welder says he can quickly put this right by depositing

On inspecting a completed 150mm OD pipe weld, some small smooth, shallow areas of undercut have been found <0....

Usually liquid penetrant testing is applicable at a temperature range of approximately

After welding is completed, the inspector would assess which of the following

Who or what determines the necessity of a post weld heat treatment?

Before welding and during welding in the cleaning stage, which statements from below would you consider are correct?

Before welding components, the welders' qualifications need to be checked. Does a tack welder also need to do a performance qualification test?